Welcome to visit Shenzhen city Tongbiao company website!

WechatFAQSitemapFavorteChinese

Scan QR code, Pay attention to wechat

ShenZhenTobyTechnologyCo.,Ltd

Professional and authoritative testing and certification organization

ShenZhenTobyTechnologyCo.,Ltd

Service Hotline

400-681-9195

Australia A-TICK

Contact Us

Australia A-tick application process |A-tick certification

Source: ShenZhenTobyTechnologyCo.,LtdPopularity: 431Time: 2016-04-18SMB

Australia A-tick application process

A/C-Tick is a certification mark issued by the Communications Authority Australian (ACA) in order to communication equipment, manufacturers and importers must follow the next step in using A-Tick:

1, the products comply with ACAQ Standard Test (C-Tick will do the testing and certification in the sub Xu)

2, to register with the A/C-Tick using ACA

3, fill in the "of Conformity" (Form Declaration), and the product is in line with the record keeping together

4, there's A/C-Tick logo (label) of 5 logo attached to the communication of products or equipment, sales to consumers A-Tick apply only to communications products, electronic products mostly c-tick application, but electronic products if the application A-Tick, then do not need to apply for another c-tick.

Since November 2001, Australia / New Zealand EMI for the merger; if the product is to be sold in this country, the following documents in the marketing of essential Qi, to prepare ACA (Australian Communications Authority) and New Zealand (Ministry of economic development) authorities at any time pumping check:

1. The test report must be by Nata and Nata and accommodation of certification bodies, such as nvlap or A2LA accredited laboratory issued is valid, or ask for samples sent to test the probability is very high.

2 "to use the C-tick Mark Application" must be signed by the Australian / New Zealand company or importer.

3 "Declaration of Conformity Supplier's" must be signed by the Australian / New Zealand company or importer responsible for the signature of the manufacturer, it is responsible to ensure that sales of products are still in line with the provisions of the EMI.

4 of the original design drawings and specifications (such as: circuit diagram, block diagram, User's Manual and Service Manual).

5 production inspection procedures are described to ensure the maintenance of EMI characteristics.

6 any changes that will affect EMI's narrative and necessary test records.

Certification cycle: 1-2 weeks

The level of a product is refers to the use of wireless spectrum jamming equipment to lower radiation products, such as manual switch, simple relay, one-way squirrel cage induction motor, resistance and so on. On level one of the products, suppliers must sign a declaration of conformity and provide product description book. Level one product can voluntarily apply C-Tick signs. But use the signs in the choice of suppliers, to provide a declaration of conformity and description of books at the same time, but also to provide compliance records to prove the statement described in the products comply with the EMC standard. The test site is not required, allowing internal testing. Level two products refers to the use of wireless spectrum jamming equipment the high radiation products, such as switching power supply, electric welder, dimmer, most of the household appliances. In addition to the supplier must sign the conformance statement and provide product descriptions, but also provide according to phase QSM in addition to cover with high radiation testing, standard test report, if there is no related standards, the need to provide technical structure file location is not required, allowing internal testing. Level 3 products is refers to the use of wireless spectrum jamming equipment products, namely CISPR11 cispr22 production. Currently communication terminal products still contains this range, but in 2003 November 7, terminal products will be classified into Level 2 products. Supplier must sign compliance statements and provide product description of the book, but also to provide by recognized testing agencies issued testing report. At the same time also issued by the certification authority of the quality management system certificate.

C-Tick mark next to the provisions of the provisions of the Australian supplier of information, so that ACA in the market when sampling products can be effectively traced back to the supplier responsible for the product EMC, the information identification includes four aspects of the content:

1 the registered name and address of the Australian supplier.
2 Australian Corporation registration number (Company Number Australian)
3 issued by the ACA to the Australian supplier number.
4 products in the Australian market for the use of the registered trademark of Australia.

Australia's EMC system to the product is divided into three levels, the supplier in the sales level two, level three products, must be registered in the ACA, apply for the use of C-Tick logo.

Grade a products refers to the use of wireless spectrum interference devices and low radiation products, such as manual switch, relay simple, one-way squirrel cage induction motor, resistance. On the level of product, the supplier must signed a declaration of conformity and provide product descriptions. Grade a products can apply for voluntary c-tick mark, but the supplier in the choice of use the logo, in the with statement and description of the book at the same time, but also to provide records of compliance with, to prove that the products described in the statement has meet the requirements of the relevant EMC standards. Test site is not required, allowing internal testing.

Level 2 products is refers to the use of wireless spectrum equipment interference radiation higher products, such as switching power supply, electric welder, dimmer, the majority of household electrical appliances and so on. Supplier except must sign the conformance statement and provide product description of the book, but also to provide test report according to the relevant standards, if there is no relevant standards, you need to provide technical construction file and test site is not required, allowing internal testing.

Level refers to the product on the use of wireless spectrum equipment interference radiation high products that cover CISPR11 cispr22 products. Currently, communication terminal products still is contained within this range, but from November 7, 2003, the end product will is divided into Level 2 products. Supplier except must sign the conformance statement and provide product description of the book, but also to provide test reports issued by a recognized testing agencies. At the same time also issued by the QSM certification issued by the quality management system certificate.